* Package: app-admin/system-config-printer-1.5.18-r2:0 * Repository: gentoo * Maintainer: reavertm@gentoo.org gnome@gentoo.org,kde@gentoo.org * USE: abi_x86_64 amd64 elibc_glibc kernel_linux keyring policykit python_single_target_python3_12 * FEATURES: network-sandbox preserve-libs sandbox userpriv usersandbox * Using python3.12 to build >>> Unpacking source... >>> Unpacking system-config-printer-1.5.18.tar.xz to /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work >>> Source unpacked in /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work >>> Preparing source in /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18 ... [ ok ] * Build system packages: * dev-python/gpep517 : 16 * dev-python/installer : 0.7.0 * dev-python/setuptools : 74.1.3-r1 * dev-python/setuptools-rust : * dev-python/setuptools-scm : 8.1.0 * dev-python/wheel : 0.44.0 >>> Source prepared. >>> Configuring source in /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18 ... * econf: updating system-config-printer-1.5.18/config.guess with /usr/share/gnuconfig/config.guess * econf: updating system-config-printer-1.5.18/config.sub with /usr/share/gnuconfig/config.sub ./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --datarootdir=/usr/share --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/system-config-printer-1.5.18-r2 --htmldir=/usr/share/doc/system-config-printer-1.5.18-r2/html --libdir=/usr/lib64 --with-xmlto --enable-nls --with-desktop-vendor=Gentoo --with-udev-rules --with-systemdsystemunitdir=/lib/systemd/system checking for a BSD-compatible install... /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for a sed that does not truncate output... /bin/sed checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/gmsgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking whether make supports the include directive... yes (GNU style) checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes checking for x86_64-pc-linux-gnu-gcc option to enable C11 features... none needed checking whether x86_64-pc-linux-gnu-gcc understands -c and -o together... yes checking dependency style of x86_64-pc-linux-gnu-gcc... none checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for ld used by x86_64-pc-linux-gnu-gcc... /usr/x86_64-pc-linux-gnu/bin/ld checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking 32-bit host C ABI... no checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ELF binary format... yes checking for the common suffixes of directories in the library search path... lib,lib,lib64 checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyPreferredLanguages... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking whether /usr/bin/python3.12 version is >= 3... yes checking for /usr/bin/python3.12 version... 3.12 checking for /usr/bin/python3.12 platform... linux checking for GNU default /usr/bin/python3.12 prefix... ${prefix} checking for GNU default /usr/bin/python3.12 exec_prefix... ${exec_prefix} checking for /usr/bin/python3.12 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.12/site-packages checking for /usr/bin/python3.12 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.12/site-packages checking for x86_64-pc-linux-gnu-pkg-config... /usr/bin/x86_64-pc-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking for CUPS SERVERBIN dir... /usr/libexec/cups checking for GLIB... yes checking for libudev... yes checking for libusb... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating system-config-printer config.status: creating system-config-printer-applet config.status: creating install-printerdriver config.status: creating dbus/scp-dbus-service config.status: creating udev/configure-printer@.service config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing depfiles commands >>> Source configured. >>> Compiling source in /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18 ... make -j2 PYTHON=: Making all in . make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' xmlto man -o man man/system-config-printer.xml Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://docbook.sf.net/el/contrib Note: AUTHOR sect.: see http://docbook.sf.net/el/personblurb Note: Writing system-config-printer.1 Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://docbook.sf.net/el/contrib Note: AUTHOR sect.: see http://docbook.sf.net/el/personblurb Note: Writing system-config-printer-applet.1 make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' touch .stamp-man-pages-built make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /usr/bin/msgfmt --xml --template system-config-printer.appdata.xml.in -d ./po -o system-config-printer.appdata.xml make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /usr/bin/msgfmt --desktop --keyword=Name --keyword=GenericName --keyword=Comment --keyword=X-GNOME-FullName --template system-config-printer.desktop.in -d ./po -o system-config-printer.desktop make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@datadir\@|/usr/share|" \ -e "s|\@localedir\@|/usr/share/locale|" \ -e "s|\@VERSION\@|1.5.18|" \ -e "s|\@PACKAGE\@|system-config-printer|" \ config.py.in > config.py make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /usr/bin/msgfmt --desktop --template print-applet.desktop.in -d ./po -o print-applet.desktop make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' if [ "." != "." ]; then \ cp ./setup.py .; \ /bin/mkdir -p cupshelpers; \ for file in cupshelpers/__init__.py cupshelpers/cupshelpers.py cupshelpers/installdriver.py cupshelpers/ppds.py cupshelpers/openprinting.py cupshelpers/xmldriverprefs.py; do \ cp ./$file $file; \ done; \ fi make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' sed \ -e "s|\@bindir\@|/usr/bin|" \ dbus/org.fedoraproject.Config.Printing.service.in >dbus/org.fedoraproject.Config.Printing.service make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' touch .stamp-distutils-in-builddir make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p cupshelpers make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@sysconfdir\@|/etc|" \ -e "s|\@cupsserverbindir\@|/usr/libexec/cups|" \ cupshelpers/config.py.in > cupshelpers/config.py make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' x86_64-pc-linux-gnu-gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.5.18\" -DPACKAGE_STRING=\"system-config-printer\ 1.5.18\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.5.18\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I. -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/sysprof-4 -pthread -O3 -march=native -mtune=native -fomit-frame-pointer -pipe -c -o udev/udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c udev/udev-configure-printer.c: In function ‘device_id_from_devpath’: udev/udev-configure-printer.c:856:10: warning: passing argument 1 of ‘g_free’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 856 | g_free(device_id); | ^~~~~~~~~ In file included from /usr/include/glib-2.0/glib/glist.h:34, from /usr/include/glib-2.0/glib/ghash.h:36, from /usr/include/glib-2.0/glib.h:52, from udev/udev-configure-printer.c:52: /usr/include/glib-2.0/glib/gmem.h:74:46: note: expected ‘gpointer’ {aka ‘void *’} but argument is of type ‘const char *’ 74 | void (g_free) (gpointer mem); | ~~~~~~~~~~~~~~~~~~^~~ udev/udev-configure-printer.c: In function ‘find_matching_device_uris’: udev/udev-configure-printer.c:1031:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1031 | cups = httpConnectEncrypt (cupsServer (), ippPort(), cupsEncryption ()); | ^~~~ In file included from /usr/include/cups/ipp.h:19, from /usr/include/cups/cups.h:28, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function ‘for_each_matching_queue’: udev/udev-configure-printer.c:1362:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1362 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function ‘enable_queue’: udev/udev-configure-printer.c:1553:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1553 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function ‘remove_queue’: udev/udev-configure-printer.c:1745:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1745 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function ‘disable_queue’: udev/udev-configure-printer.c:1777:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1777 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:478:26: note: declared here 478 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' : setup.py build make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' x86_64-pc-linux-gnu-gcc -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/sysprof-4 -pthread -O3 -march=native -mtune=native -fomit-frame-pointer -pipe -Wl,-O1 -Wl,--as-needed -Wl,-z,pack-relative-relocs -o udev/udev-configure-printer udev/udev_configure_printer-udev-configure-printer.o -lcups -ludev -lusb-1.0 -lglib-2.0 make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' Making all in po make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18/po' make[1]: Nothing to be done for 'all'. * Building the wheel for system-config-printer-1.5.18 via setuptools.build_meta:__legacy__ python3.12 -m gpep517 build-wheel --prefix=/usr --backend setuptools.build_meta:__legacy__ --output-fd 3 --wheel-dir /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/wheel 2024-11-28 04:48:26,008 gpep517 INFO Building wheel via backend setuptools.build_meta:__legacy__ 2024-11-28 04:48:26,081 root INFO running bdist_wheel 2024-11-28 04:48:26,298 root INFO running build 2024-11-28 04:48:26,298 root INFO running build_py 2024-11-28 04:48:26,312 root INFO creating /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build 2024-11-28 04:48:26,312 root INFO creating /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib 2024-11-28 04:48:26,312 root INFO creating /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers 2024-11-28 04:48:26,312 root INFO copying cupshelpers/xmldriverprefs.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers 2024-11-28 04:48:26,313 root INFO copying cupshelpers/openprinting.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers 2024-11-28 04:48:26,313 root INFO copying cupshelpers/cupshelpers.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers 2024-11-28 04:48:26,314 root INFO copying cupshelpers/__init__.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers 2024-11-28 04:48:26,314 root INFO copying cupshelpers/ppds.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers 2024-11-28 04:48:26,315 root INFO copying cupshelpers/installdriver.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers 2024-11-28 04:48:26,315 root INFO copying cupshelpers/config.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers 2024-11-28 04:48:26,316 root WARNING warning: build_py: byte-compiling is disabled, skipping. 2024-11-28 04:48:26,343 root INFO installing to /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel 2024-11-28 04:48:26,343 root INFO running install 2024-11-28 04:48:26,376 root INFO running install_lib 2024-11-28 04:48:26,390 root INFO creating /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64 2024-11-28 04:48:26,390 root INFO creating /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel 2024-11-28 04:48:26,390 root INFO creating /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel/cupshelpers 2024-11-28 04:48:26,391 root INFO copying /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers/xmldriverprefs.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel/./cupshelpers 2024-11-28 04:48:26,391 root INFO copying /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers/openprinting.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel/./cupshelpers 2024-11-28 04:48:26,392 root INFO copying /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers/cupshelpers.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel/./cupshelpers 2024-11-28 04:48:26,392 root INFO copying /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers/__init__.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel/./cupshelpers 2024-11-28 04:48:26,392 root INFO copying /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers/ppds.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel/./cupshelpers 2024-11-28 04:48:26,393 root INFO copying /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers/installdriver.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel/./cupshelpers 2024-11-28 04:48:26,393 root INFO copying /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/lib/cupshelpers/config.py -> /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel/./cupshelpers 2024-11-28 04:48:26,394 root WARNING warning: install_lib: byte-compiling is disabled, skipping. 2024-11-28 04:48:26,394 root INFO running install_egg_info 2024-11-28 04:48:26,408 root INFO running egg_info 2024-11-28 04:48:26,408 root INFO creating cupshelpers.egg-info 2024-11-28 04:48:26,421 root INFO writing cupshelpers.egg-info/PKG-INFO 2024-11-28 04:48:26,421 root INFO writing dependency_links to cupshelpers.egg-info/dependency_links.txt 2024-11-28 04:48:26,422 root INFO writing top-level names to cupshelpers.egg-info/top_level.txt 2024-11-28 04:48:26,422 root INFO writing manifest file 'cupshelpers.egg-info/SOURCES.txt' ERROR setuptools_scm._file_finders.git listing git files failed - pretending there aren't any 2024-11-28 04:48:26,494 root INFO reading manifest file 'cupshelpers.egg-info/SOURCES.txt' 2024-11-28 04:48:26,495 root INFO adding license file 'COPYING' 2024-11-28 04:48:26,495 root INFO adding license file 'AUTHORS' 2024-11-28 04:48:26,497 root INFO writing manifest file 'cupshelpers.egg-info/SOURCES.txt' 2024-11-28 04:48:26,498 root INFO Copying cupshelpers.egg-info to /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel/./cupshelpers-1.0-py3.12.egg-info 2024-11-28 04:48:26,500 root INFO running install_scripts 2024-11-28 04:48:26,503 root INFO creating /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel/cupshelpers-1.0.dist-info/WHEEL 2024-11-28 04:48:26,504 wheel INFO creating '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/wheel/.tmp-xxtday6y/cupshelpers-1.0-py3-none-any.whl' and adding '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel' to it 2024-11-28 04:48:26,505 wheel INFO adding 'cupshelpers/__init__.py' 2024-11-28 04:48:26,505 wheel INFO adding 'cupshelpers/config.py' 2024-11-28 04:48:26,506 wheel INFO adding 'cupshelpers/cupshelpers.py' 2024-11-28 04:48:26,506 wheel INFO adding 'cupshelpers/installdriver.py' 2024-11-28 04:48:26,506 wheel INFO adding 'cupshelpers/openprinting.py' 2024-11-28 04:48:26,507 wheel INFO adding 'cupshelpers/ppds.py' 2024-11-28 04:48:26,507 wheel INFO adding 'cupshelpers/xmldriverprefs.py' 2024-11-28 04:48:26,508 wheel INFO adding 'cupshelpers-1.0.dist-info/AUTHORS' 2024-11-28 04:48:26,508 wheel INFO adding 'cupshelpers-1.0.dist-info/COPYING' 2024-11-28 04:48:26,509 wheel INFO adding 'cupshelpers-1.0.dist-info/METADATA' 2024-11-28 04:48:26,509 wheel INFO adding 'cupshelpers-1.0.dist-info/WHEEL' 2024-11-28 04:48:26,509 wheel INFO adding 'cupshelpers-1.0.dist-info/top_level.txt' 2024-11-28 04:48:26,509 wheel INFO adding 'cupshelpers-1.0.dist-info/RECORD' 2024-11-28 04:48:26,510 root INFO removing /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/build/bdist.linux-x86_64/wheel 2024-11-28 04:48:26,512 gpep517 INFO The backend produced /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/wheel/cupshelpers-1.0-py3-none-any.whl * Installing cupshelpers-1.0-py3-none-any.whl to /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/install python3.12 -m gpep517 install-wheel --destdir=/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/install --interpreter=/usr/bin/python3.12 --prefix=/usr --optimize=all /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/wheel/cupshelpers-1.0-py3-none-any.whl 2024-11-28 04:48:26,735 gpep517 INFO Installing /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/wheel/cupshelpers-1.0-py3-none-any.whl into /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18_python3.12/install 2024-11-28 04:48:26,874 gpep517 INFO Installation complete >>> Source compiled. * Skipping make test/check due to ebuild restriction. >>> Test phase [disabled because of RESTRICT=test]: app-admin/system-config-printer-1.5.18-r2 >>> Install app-admin/system-config-printer-1.5.18-r2 into /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image make -j2 DESTDIR=/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image PYTHON=: install Making install in . make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' : setup.py build make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' : setup.py install --prefix=/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/bin' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/bin' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/metainfo' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 system-config-printer.appdata.xml '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/metainfo' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/etc/cupshelpers' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 xml/preferreddrivers.xml '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/etc/cupshelpers' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/dbus-1/interfaces/' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 dbus/org.fedoraproject.Config.Printing.xml '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/dbus-1/interfaces/' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/etc/dbus-1/system.d/' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/etc/dbus-1/system.d/' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' mkdir -p /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/applications/ make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' mkdir -p /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/applications/ make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' desktop-file-install --vendor Gentoo \ --dir /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/applications/ \ --add-category System \ --add-category Settings \ --add-category HardwareSettings \ --add-category Printing \ --add-category GTK \ system-config-printer.desktop make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' desktop-file-install --vendor Gentoo \ --dir /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/etc/xdg/autostart/ \ --add-category System \ --add-category Monitor \ --add-category GTK \ print-applet.desktop make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/man/man1' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/man/man1' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer/troubleshoot/' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c troubleshoot/__init__.py '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer/troubleshoot/' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer/troubleshoot' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer/troubleshoot' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer/ui' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer/ui' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer/.' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer/xml' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 xml/preferreddrivers.rng xml/validate.py '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer/xml' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer/icons' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 icons/i-network-printer.png '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/system-config-printer/icons' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/lib/systemd/system' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 udev/configure-printer@.service '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/lib/systemd/system' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/dbus-1/services/' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 dbus/org.fedoraproject.Config.Printing.service '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/dbus-1/services/' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/lib/udev' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c udev/udev-configure-printer '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/lib/udev' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/lib/udev' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c udev/udev-add-printer '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/lib/udev' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' make[2]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' /bin/mkdir -p '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/lib/udev/rules.d' /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 udev/70-printers.rules '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/lib/udev/rules.d' make[2]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18' Making install in po make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18/po' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18/po' installing ar.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo installing as.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo installing ast.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo installing bg.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo installing bn_IN.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo installing bn.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo installing br.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo installing bs.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo installing ca.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo installing cs.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo installing cy.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo installing da.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo installing de.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo installing el.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo installing en_GB.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo installing es.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo installing et.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo installing fa.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo installing fi.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo installing fr.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo installing fur.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo installing gu.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo installing he.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo installing hi.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo installing hr.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo installing hu.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo installing id.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo installing is.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo installing it.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo installing ja.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo installing ka.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo installing kn.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo installing ko.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo installing lt.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo installing lv.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo installing mai.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo installing ml.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo installing mr.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo installing ms.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo installing nb.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo installing nds.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo installing nl.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo installing nn.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo installing oc.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo installing or.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo installing pa.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo installing pl.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo installing pt_BR.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo installing pt.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo installing ro.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo installing ru.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo installing si.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo installing sk.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo installing sl.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo installing sr@latin.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo installing sr.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo installing sv.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo installing ta.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo installing te.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo installing th.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo installing tr.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo installing uk.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo installing vi.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo installing zh_CN.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo installing zh_TW.gmo as /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18/po' make[1]: Entering directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18/po' if test "system-config-printer" = "gettext-tools"; then \ /bin/mkdir -p /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/lib/portage/python3.12/ebuild-helpers/xattr/install -c -m 644 ./$file \ /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[1]: Leaving directory '/var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/work/system-config-printer-1.5.18/po' * Fixing shebang in /lib/udev/udev-add-printer. * Fixing shebang in /usr/share/system-config-printer/monitor.py. * Fixing shebang in /usr/share/system-config-printer/debug.py. * Fixing shebang in /usr/share/system-config-printer/install-printerdriver.py. * Fixing shebang in /usr/share/system-config-printer/asyncconn.py. * Fixing shebang in /usr/share/system-config-printer/check-device-ids.py. * Fixing shebang in /usr/share/system-config-printer/OpenPrintingRequest.py. * Fixing shebang in /usr/share/system-config-printer/gtkinklevel.py. * Fixing shebang in /usr/share/system-config-printer/installpackage.py. * Fixing shebang in /usr/share/system-config-printer/ppdcache.py. * Fixing shebang in /usr/share/system-config-printer/PhysicalDevice.py. * Fixing shebang in /usr/share/system-config-printer/system-config-printer.py. * Fixing shebang in /usr/share/system-config-printer/authconn.py. * Fixing shebang in /usr/share/system-config-printer/scp-dbus-service.py. * Fixing shebang in /usr/share/system-config-printer/firewallsettings.py. * Fixing shebang in /usr/share/system-config-printer/asyncipp.py. * Fixing shebang in /usr/share/system-config-printer/xml/validate.py. * Fixing shebang in /usr/share/system-config-printer/timedops.py. * Fixing shebang in /usr/share/system-config-printer/newprinter.py. * Fixing shebang in /usr/share/system-config-printer/gui.py. * Fixing shebang in /usr/share/system-config-printer/ppdippstr.py. * Fixing shebang in /usr/share/system-config-printer/smburi.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/ErrorLogCheckpoint.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/QueueRejectingJobs.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/ChoosePrinter.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/PrinterStateReasons.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/PrintTestPage.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/CheckLocalServerPublishing.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/base.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/ChooseNetworkPrinter.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/RemoteAddress.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/VerifyPackages.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/Locale.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/Shrug.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/CheckPrinterSanity.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/CheckUSBPermissions.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/ErrorLogParse.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/QueueNotEnabled.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/NetworkCUPSPrinterShared.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/__init__.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/Welcome.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/CheckPPDSanity.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/DeviceListed.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/SchedulerNotRunning.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/CheckNetworkServerSanity.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/ServerFirewalled.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/CheckSELinux.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/LocalOrRemote.py. * Fixing shebang in /usr/share/system-config-printer/troubleshoot/ErrorLogFetch.py. * Fixing shebang in /usr/share/system-config-printer/statereason.py. * Fixing shebang in /usr/share/system-config-printer/dnssdresolve.py. * Fixing shebang in /usr/share/system-config-printer/asyncpk1.py. * Fixing shebang in /usr/share/system-config-printer/pysmb.py. * Fixing shebang in /usr/share/system-config-printer/killtimer.py. * Fixing shebang in /usr/share/system-config-printer/ppdsloader.py. * Fixing shebang in /usr/share/system-config-printer/printerproperties.py. * Fixing shebang in /usr/share/system-config-printer/userdefault.py. * Fixing shebang in /usr/share/system-config-printer/serversettings.py. * Fixing shebang in /usr/share/system-config-printer/applet.py. * Fixing shebang in /usr/share/system-config-printer/errordialogs.py. >>> Completed installing app-admin/system-config-printer-1.5.18-r2 into /var/tmp/portage/app-admin/system-config-printer-1.5.18-r2/image * Final size of build directory: 15264 KiB (14.9 MiB) * Final size of installed tree: 7536 KiB ( 7.3 MiB) * Verifying compiled files for python3.12 strip: x86_64-pc-linux-gnu-strip --strip-unneeded -N __gentoo_check_ldflags__ -R .comment -R .GCC.command.line -R .note.gnu.gold-version /lib/udev/udev-configure-printer [ ok ] [ ok ]